The SCAN 200 line has been especially developped to master your assembly clearance, your mach gages and your parts profiles by a complete scanning of bores and axis

• SCAN 200 for measurement of bores.
• SCAN 201 for axis measurement.
• SCAN 202 for clearance measurement.

The advantages of the SCAN line :

• Exploration of male or female line with the same pneumatic measurement technology (primordial at the time of the measurement of the assembly clearance).
• Measurement of high precision in shop environment.
• Length measurements of bores...
• This technology can be installed in metrology, in assembly line, in pre-process, in in-process or in post-process.
• The SCAN detects especially the machining defects caused by the boring machines, the grinding machines, the honing machines,..
• Mastering semi-automatic (static or dynamic).
• Cleaning of the part measured by blowing.
• Possibility of realizing production and metrology measurements with the same means.
• Displaying and printing of all acquisitions for an expertise of profile,
• Special multiples applications were realized with the principle of the ETAMIC SCAN from Ø1.5mm to 100mm

Specifications :

• Maximum scanning travel : 100mm
• Maximum number of acquisition per scanning measurement : 32000
• Maximum weight of measured parts : 50kg
• Accuracy of the length measurement length : ±0.025mm
• Cycle time lower than 20 seconds, for a scanning of 20mm
• Repeatabilities of exceptional gages.
  
  Ex : GR&R<10% for bore or axis with a tolerance range of 0.001mm